Storage & NAS / Guide

TrueNAS, OpenMediaVault or Unraid: which system for your home-built NAS?

Building your own NAS on a PC, a mini PC or a server: the three most widely used systems compared (storage, hardware, containers, VMs, licence, updates), the recommended hardware for each, and the other options such as Proxmox VE or Debian with Samba.

Storage & NAS Guide Intermediate Published October 20, 2026 Translated November 20, 2026 14 min read Version française
A black computer tower on a white table
Photo: Nathan Anderson on Unsplash

In plain words

A home-built NAS is an ordinary computer (an old PC, a mini PC, a second-hand server) on which you install a specialised system instead of Windows. You get the same thing as an off-the-shelf NAS, often with more powerful and more upgradeable hardware, but it's up to you to assemble, configure and maintain it. The three most common systems each have their own philosophy: TrueNAS bets everything on data safety with ZFS, OpenMediaVault on lightness and simplicity, Unraid on flexibility with disks of any size.

To compare with a ready-made NAS, see the comparison of off-the-shelf NAS devices. For RAID and ZFS concepts, see understanding storage.

1. The three systems at a glance

TrueNAS Community Edition OpenMediaVault Unraid
Vendor iXsystems (United States) Community project (Volker Theile) Lime Technology (United States)
Base Debian (Linux) Debian (Linux); OMV 8 "Synchrony" is based on Debian 13 Slackware (Linux)
Licence Open source and free Open source and free Proprietary, paid: perpetual licence (Starter up to 6 storage devices, Unleashed and Lifetime with no limit; one year of updates for Starter and Unleashed, lifetime for Lifetime), tied to the USB stick or, since Unraid 7.3, to the motherboard through the TPM
Storage ZFS only mdadm (software RAID) + ext4, XFS, Btrfs; ZFS, SnapRAID and mergerfs through extensions Parity array (independent disks) and ZFS or Btrfs pools
Philosophy Data integrity above all Light, close to Debian, even runs on a Raspberry Pi Mix disks of any size, add one disk at a time
Interface Complete, storage-oriented Simple and plain Very approachable, large library of community applications

TrueNAS: a single edition today

TrueNAS SCALE (on Linux) has been renamed TrueNAS Community Edition. The old TrueNAS CORE edition, on FreeBSD, is no longer developed: for a new installation, choose the Community Edition. In 2026 iXsystems moves to one major version a year, numbered by year (TrueNAS 26).

2. The detailed comparison

Criterion TrueNAS OpenMediaVault Unraid
Disks of different sizes Not recommended: within a group (vdev), capacity is aligned on the smallest disk Possible with mergerfs + SnapRAID, otherwise aligned on the smallest (mdadm) Yes, it's its strong point; the parity disk must be at least as large as the largest data disk
Adding a disk Possible one at a time in a RAIDZ since OpenZFS 2.3 (RAIDZ expansion), or by adding a whole vdev Yes (growing an mdadm array) Yes, one disk at a time: the new disk is cleared first, with no parity recalculation
Data integrity Excellent: checksums and self-healing on every block Depends on the file system chosen (Btrfs or ZFS for checksums) Good on ZFS pools; on the array, checksums through an extension
Performance High: reads and writes spread across all the disks High with mdadm RAID On the array, reads at the speed of a single disk; slower writes because of parity (often 20 to 40 MB/s, more in turbo write mode); an SSD cache pool absorbs writes
Power consumption All the disks spin together All the disks spin together (except with mergerfs) Low: only the disks in use spin, the others stop
Loss beyond the tolerance The whole pool is lost The whole array is lost (mdadm) Only the failed disks are lost: the others remain readable individually
Containers Apps (Docker), built-in catalogue, and custom applications in Compose Docker and Compose through the omv-extras extension Docker, huge community catalogue (Community Applications)
Virtual machines Yes (KVM), and LXC containers announced with TrueNAS 26 Possible through an extension (KVM), rarely used Yes (KVM), with easy graphics card passthrough
Updates Annual version and intermediate releases Follows Debian; updates through apt Regular; one year of updates included (Starter, Unleashed, extendable), lifetime with Lifetime
Learning curve Medium: ZFS requires understanding pools, vdevs and datasets Low for anyone used to Debian Low: the most approachable

3. Recommended hardware

TrueNAS OpenMediaVault Unraid
Processor 64-bit x86, 2 cores minimum; more for apps and VMs 64-bit x86 or 64-bit ARM (Raspberry Pi 4 and 5) 64-bit x86
Memory 8 GB minimum, 16 GB or more recommended (ZFS uses free memory as a cache) 1 to 2 GB is enough for files; more for Docker 4 GB recommended as a minimum, 8 GB or more with Docker and VMs
ECC Recommended Optional Optional
Boot A small dedicated SSD (16 GB minimum), not a USB stick An SSD or a good-quality microSD card (Raspberry Pi) A good-quality USB stick, or since Unraid 7.3 an internal SSD or NVMe drive, optionally mirrored
Disk controller Motherboard SATA ports or an HBA card in IT mode; never hardware RAID SATA ports or HBA SATA ports or HBA; no hardware RAID

No hardware RAID under ZFS

ZFS must see each disk individually. A RAID card, even set to "JBOD", hides errors and the disks' SMART status. If you need more ports, get an HBA card (for example based on an LSI SAS2008, SAS2308 or SAS3008 controller) flashed to IT mode, widely available second-hand.

Example configurations

Use Typical hardware Recommended system
Small, very frugal NAS for files and backups Raspberry Pi 5 with a SATA enclosure, or an old laptop with USB drives OpenMediaVault
Family NAS: photos, Jellyfin, a few containers Intel N100 or N150 mini PC with a 4-bay enclosure, 16 GB Unraid or OpenMediaVault
Large media library with disks of various sizes, collected over time Tower with 6 to 10 bays, Intel processor with Quick Sync Unraid
Precious data, business backups, replication Server with ECC memory, HBA card, identical disks TrueNAS

4. The other options

Option Principle For whom
Proxmox VE + TrueNAS in a VM The hypervisor hosts TrueNAS in a VM, which is given the whole HBA card through passthrough A homelab that wants a single server for everything; for confident users only (see installing Proxmox VE)
Proxmox VE alone ZFS is built into Proxmox: an LXC container with Samba shares the files Those who already run Proxmox and have a simple sharing need
Debian or Ubuntu + Samba A regular distribution, shares configured by hand Linux administrators who want to control everything
XigmaNAS Successor to NAS4Free, on FreeBSD, with ZFS FreeBSD regulars

The disks of a TrueNAS VM

Never give a TrueNAS VM virtual disks created on another storage, nor disks passed through one by one without care: ZFS would lose direct access to the disks. The reliable method is passing through the whole controller card (HBA), which requires a processor and a motherboard compatible with IOMMU (VT-d or AMD-Vi).

5. Which one to choose?

Your priority Recommended choice
Data safety above all, identical disks TrueNAS
Modest hardware or a Raspberry Pi, a system close to Debian OpenMediaVault
Disks of different sizes, adding disks over time, low power consumption Unraid
A simple interface with lots of ready-to-install applications Unraid, then TrueNAS
Staying 100% open source and free TrueNAS or OpenMediaVault
A single server for VMs and storage Proxmox VE, with or without TrueNAS in a VM

6. Common rules

  • The NAS is not a backup of itself: copy important data elsewhere, including an off-site copy (see the 3-2-1 rule).
  • NAS-range CMR disks; for ZFS, disks of the same size within a vdev.
  • Enable scheduled SMART tests, a monthly scrub with ZFS or Btrfs, and email alerts.
  • Schedule regular snapshots of the shares.
  • Don't expose the admin interface to the internet: go through a VPN (WireGuard, Tailscale).
  • Create a named administrator account (spo) and disable or protect the default root or admin account.
  • Write down your configuration (disks, serial numbers, pools, shares): on the day of a failure, you'll be glad you did.

Key points

  • TrueNAS: ZFS, maximum integrity, ideal with identical disks and 16 GB of memory.
  • OpenMediaVault: light and simple, based on Debian, even runs on a Raspberry Pi.
  • Unraid: disks of any size, added one by one, low power consumption, very approachable, but paid.
  • Never hardware RAID under ZFS: an HBA card in IT mode to add ports.
  • Whatever the system: back up elsewhere, SMART, scrub, snapshots, no direct exposure to the internet.

Read next